Bradley Fighting Vehicle

An M2A3 Bradley Fighting Vehicle from 5th Squadron, 4th Cavalry Regiment, 2nd Armored Brigade Combat Team, 1st Infantry Division, moves into position to conduct a firing systems check at the Presidenski Range, Trzebian, Poland, Sept. 20. The Brigade was in the middle of its 10-day preparation period to be mission ready. (U.S. Army photo by Staff Sgt. Wallace Bonner)

The Bradley Fighting Vehicle (BFV) is an American fighting vehicle platform manufactured by BAE Systems Land and Armaments, formerly United Defense. It was named after U.S. General Omar Bradley.

The Bradley is designed to transport infantry or scouts with armor protection while providing covering fire to suppress enemy troops and armored vehicles. There are several Bradley variants, including the M2 Infantry Fighting Vehicle and the M3 Cavalry Fighting Vehicle. The M2 holds a crew of three: a commander, a gunner and a driver, as well as six fully equipped soldiers. The M3 mainly conducts scout missions and carries two scouts in addition to the regular crew of three, with space for additional TOW missiles.

The Bradley was developed largely in response to the Soviet BMP family of infantry fighting vehicles, and to serve as both an Armored personnel carrier (APC), and a tank-killer. One specific design requirement was that it should be as fast as the then new M1 Abrams main battle tank so that they could maintain formations while moving, something which the older M113 Armored Personnel Carrier could do even better thanks to superior engine power/weight ratio, even though it had been designed to complement the older and slower M60 Patton.

Variants

M2 Bradley

M3 Bradley

The M3 Bradley Cavalry Fighting Vehicle (CFV) is virtually identical to the M2 Bradley except that it is equipped as a cavalry/scout vehicle. Instead of holding six infantrymen in the payload compartment, it is designed to seat two scouts and hold additional radios and ammunition. Also lacking are the six external firing ports present on the M2 Bradley IFV.

M4 Command and Control Vehicle (C2V)

The C2V is based on the M993 MLRS carrier chassis (see below) and is designed to provide an automated tactical command post and operations centers. It was designed to replace the M113-based M577A2 Command Post Carrier. Mass production was cancelled in late 1999. Around 25 vehicles were finally produced for the US Army.

Bradley Stinger Fighting Vehicle (BSFV)

The BSFV is designed specifically for the carriage and support of a Stinger MANPADS team. The MANPADS-Under-Armor (MUA) dismounted Stinger team concept of the BSFV left the operators exposed, so it was replaced by the M6 Linebacker, which also retained the dismounted Stinger missile capability.

Warhammer Bradley

Modified M2A2 ODSs with the TOW missile system replaced with a two-tube Javelin Missile System, and ISU (Integrated Sight Unit) modifications for increased anti-tank lethality, without the need to continually track the target.

M6 Linebacker

An air defense variant, these vehicles are modified M2A2 ODSs with the TOW missile system replaced with a four-tube Stinger missile system. From 2005-2006, M6 Linebackers had their Stinger missile systems removed and were converted to standard M2 Bradley ODS infantry fighting vehicles.

M7 Bradley Fire Support Vehicle

The B-FiST has replaced the existing armored FiST vehicle (FiST-V) platform, the M981 FISTV, in the U.S. Army inventory. The TOW/UA suite is replaced by target location equipment, integrated with the Bradley ISU sight unit. It also carries equipment for use by dismounted observers. There is a hybrid GPS/inertial/dead reckoning navigation system to robustly provide the vehicle location as a reference point.

Bradley Engineer Squad Vehicle

The Bradley ESV enables engineer assests to maintain momentum with the main force while conducting engineer and sapper operations. The ESV is equipped with standard combat engineering equipment and can employ unique mission equipment packages for obstacle neutralization.

Bradley Battle Command Vehicle

The Bradley BCV allows brigade commanders to move around the battlefield away from their command post. The BCV integrates an enhanced command and control communication suite to maintain digital interface with maneuver forces and the Tactical Operations Center (TOC).

M993/M270 Multiple Launch Rocket System Carrier Vehicle

The M270 MLRS is composed of two major sections: a M269 Launcher Loader Module mated to a M993 carrier vehicle. The M993 carrier vehicle portion is a modified BFV chassis.

Black Knight

The Black Knight prototype unmanned ground combat vehicle being developed by BAE resembles a tank and makes extensive use of components from the Bradley Combat Systems program to reduce costs and simplify maintenance. It is also designed to be remotely operated from a BFV commander's station while riding mounted, as well as being controllable by dismounted infantry.

Turretless Bradley

For the U.S. Army's Armored Multi-Purpose Vehicle (AMPV) program to replace the M113, BAE is offering a new version of the Bradley. The AMPV submission is a turretless Bradley chassis, which gives greater cargo space, as well as increased armor and upgraded engine and electrical power systems. For increased protection, a v-shaped bottom will replace the flat bottom. The AMPV version will also have different roof sections with varying heights to make it modular for each role. The engine and transmission are the same as other Bradleys. For better fuel efficiency, BAE is considering giving the Turretless Bradley a hybrid-electric drive, similar to the one used in their GCV Infantry Fighting Vehicle. It is suggested that the vast fleet of surplus Bradleys could be retrofitted into this version. The Turretless Bradley is competing against General Dynamics' Tracked Stryker for the contract.

Specifications
Weight 27.6 tonnes (30.4 short tons)
Length 6.55 m
Width 3.6 m
Height 2.98 m
Crew 3 + variable number of passengers depending on variant
Armor Spaced laminate armor: 30 mm AP and RPG all around protection. explosive reactive armor.
Main
armament
25 mm M242 chain gun
TOW anti-tank missile
Secondary
armament
7.62 mm M240C machine gun
Engine Cummins VTA-903T diesel
600 hp (447 kW)
Power/weight 19.74 hp/tonne
Suspension torsion bar
Operational
range
483 km or 300 mi
Speed 66 km/h or 41 mph

Source

The information contained on this page is unclassified, approved for public dissemination and is released under CC-BY-SA Licensing Agreement.